We offer ready made micropipettes, pulled with a Sutter P-97 puller.

The outside diameter of the shaft is 1.2 mm, fitting Grip Head No. 1 of the Eppendorf Capillary Holder.

The micropipettes have inner filaments which allow to fill from rear opening, using e.g Eppendorf Microloader tips or Eppendorf GELoader® tips.

Orifice is between 0.2 and 0.5 µm, custom sizes are available upon request.
Micropipettes are packed into sterile 80 mm Petri dishes directly after pulling.

Dishes of 10 micropipettes each can be ordered (Part No. 540200).
Go to page top